Showing 1 - 6 of 6, total 1 pages [First] [Previous] [Next] [Last] |
| |
| |
1 | | | liquid-gas separator
Specification: ZYQ800
Detail: ZYQ series mud gas separator (Poor Boy ) is the professional equipment to process the gas cut drilling mud. The proportion and viscosity of the gas cut mud will emerge large deviation, it can not meet the requirement of drilli...
|
|
2 | | | mud mixer
Specification: HHQ150
Detail: The unit is used to make up drilling fluid or increase total amount of the drilling fluid, change the fluid density, viscosity, and dehydration. When making up again, put the materials of drilling fluid (such as betonies and b...
|
|
3 | | | mud agitator
Specification: JB15
Detail: The main model of mud agitator designed, developed and produced by the co***ny are JB/W22, JB/W18.5, JB/W15, JB/W11, JB/W7.5, JB/W5.5. The reducer adopts worm or worm wheel, with tight structure, good meshing performance and r...
|
|
4 | | | centrifuge
Specification: LW355,LW450,LW530
Detail: LW Series Decanting Centrifuge Technical advantages of LW series Centrifuge 7 patents: &©|61548; A flow controller for adjusting and controlling the feed quantity of the centrifuge &©|61548; A main bearing seat of the centri...
|
|
5 | | | desilter
Specification: CN100desilter
Detail: CN series Desilter is the third class solids control equipment of drilling-fluid solid control system. The design of desilter cyclones are based on the centrifuge-setting principle of particles. The separating drilling fluid...
|
|
6 | | | desander
Specification: CS250desander
Detail: CS series desander is the second class solids control equipment of drilling-fluid solid control system. The design of desander cyclones are based on the centrifuge-setting principle of particles. The separating drilling fluid...
|
|
Home
